KLINGERSIL® C-8200
More safety for the use with high concentrated acids
KLINGERSIL® C-8200 is a premium high-pressure gasket which offers more safety for the use with high concentrated acids.
Basis
Glass fibers, bonded with special acid-resistant elastomers.
Areas of application
This material is resistant to a wide variety of media and especially to acids.
Typical technical data for thickness 2.0 mm
Compressibility ASTM F 36 J |
% |
9 | |
Recovery ASTM F 36 J |
% | 55 | |
KLINGER cold/hot compression |
thickness decrease at 23 °C |
% % |
7 15 |
Specific leakrate λ |
VDI 2440 | mbar x l/s x m | 9.17E-09 |
Density |
g/cm3 | 1.7 |
|
Acid tests |
|||
Thickness increase after fluid |
HNO3, 96%, 18 h / 23 °C |
% % % % % |
unsuitable |
Average surface resistance |
ρO | Ω | 5.8x10E11 |
Average specific volume resistance |
ρD | Ω cm | 4.1x10E12 |
Average dielectric strength |
Ed |
kV/mm | 17.0 |
Average power factor |
50 Hz | tan δ | 0.228 |
Average dielectric coefficient |
50 Hz | εr | 9.4 |
ASME-Code sealing factors
for gasket thickness 1.0 mm |
tightness class 0.1 mg / s x m |
MPa | y 20 |
for gasket thickness 2.0 mm |
tightness class 0.1 mg / s x m |
MPa | y 20 |
for gasket thickness 3.0 mm |
tightness class 0.1 mg / s x m |
MPa | y 20 |
Dimensions of the standard sheets
Sizes | 2000 x 1500 mm |
Thicknesses | 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm |
Tolerances | Thickness acc. to DIN 28091-1 Length ±50 mm, Width ±50 mm |
Other thicknesses, sizes and tolerances on request.
Function and durability
The performance and service life of KLINGER gaskets depend to a large extent on proper storage and fitting - factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also take note of our installation manual.
Downloads
Below you can find more product-related information.